|
Post by gmcchamp99 on Mar 30, 2011 10:25:44 GMT -5
EIs it possible to change the oil pan gasket on a 77 granada with the 302 with the engine still in the car?
|
|
|
Post by chriscris on Mar 31, 2011 7:47:40 GMT -5
it can be done. disconnecting the motor mounts, and raising the motor as high as you can. May have to disconnect a few other things (steering linkage, etc. ) to gain 'drop' clearance. If you arent using a hoist, be prepared for a lot of crawling aroung...
|
|
|
Post by gmcchamp99 on Mar 31, 2011 8:28:45 GMT -5
So basically its almost a motor pull? Might as well just disconnect the tranny and exaust pipes and look at the lower end of the block while im there and see what things are looking like. Maybe a rear main seal replacement.
|
|