|
Post by mtburger on Aug 31, 2016 10:05:09 GMT -5
Hello All.
Hoping I can locate a hood to use on my project.
I need a hood I can cut a hole in / mount a scoop on as I am currently running an aluminum head 351w roller cam engine with an Edelbrock Super Victor and I do not want to cut up my original hood.
Does not need to be perfect, but not rotted to death please.
Thanks, Mike Howard. cell 617-913-5540
|
|
|
Post by mtburger on Sept 1, 2016 10:21:10 GMT -5
I figure I would post up a picture of it as it sits now. I have installed a Versailles 9 inch rear, but deleted the disks in favor of a 12X2 drum set up and a set of custom 31 spline axles with an 3:91 geared, "N" case 4 pinion traction lock out of a 1970 Cyclone. It has been converted to 4 speed with a freshly rebuild RUG-AT top loader and I have taken the stock engine up a notch with an Edelbrock Performer RPM Air Gap, 600 cfm Holley 1850 and duel exhaust. I have also removed the power steering and the AC stuff for the time being. Probably should have just started a build thread. Thanks, Mike H.
|
|